Easily Maintain Your Ultimaker 3 or Ultimaker 3 Extended 3D Printer
Take care of your Ultimaker 3 and Ultimaker 3 Extended+ 3D printer with ease and confidence. As an all-in-one solution, this maintenance kit contains all of the necessary parts to make routine maintenance seamless and fast for you.
The maintenance kit includes:
- 2x Bowden tube
- 1x XY calibration sheet
- 1x Calibration card
- 1x Glass plate
- 1x Hex screwdriver 2.0
- 5x Silicone nozzle cover
- 4x Clamp clip
- 4x Tube coupling collet
- 2x Build plate clamp
- 1x Ultimaker 3 cleaning filament
- 1x Axial fan
- 2x Radial fan
Maintenance schedule
Note: If the usage frequency is higher, please increase the frequency of maintenance on your machine to maintain optimal printing results.
To keep your Ultimaker 3 in optimal condition we recommend the following maintenance schedule, based on 1500 printing hours a year.
| Every month | Every 3 months | Every year |
| Clean printer | Check for play on axles | Clean feeders and replace bowden tubes |
| Lubricate axles | Check tension of short belts | |
| Check for residue in front fan of print head | ||
| Check quality of silicone nozzle cover | ||
| Clean print cores | ||
Reviews
There are no reviews yet.